Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
 
%ifndef __ASM_GENERIC_IOCTLS_INC
%define __ASM_GENERIC_IOCTLS_INC

; These are the most common definitions for tty ioctl numbers.
; Most of them do not use the recommended _IOC(), but there is
; probably some source code out there hardcoding the number,
; so we might as well use them for all new platforms.
; 
; The architectures that use different values here typically
; try to be compatible with some Unix variants for the same
; architecture.

;  0x54 is just a magic number to make these relatively unique ('T') 

	%define TCGETS				0x5401
	%define TCSETS				0x5402
	%define TCSETSW				0x5403
	%define TCSETSF				0x5404
	%define TCGETA				0x5405
	%define TCSETA				0x5406
	%define TCSETAW				0x5407
	%define TCSETAF				0x5408
	%define TCSBRK				0x5409
	%define TCXONC				0x540A
	%define TCFLSH				0x540B
	%define TIOCEXCL			0x540C
	%define TIOCNXCL			0x540D
	%define TIOCSCTTY			0x540E
	%define TIOCGPGRP			0x540F
	%define TIOCSPGRP			0x5410
	%define TIOCOUTQ			0x5411
	%define TIOCSTI				0x5412
	%define TIOCGWINSZ			0x5413
	%define TIOCSWINSZ			0x5414
	%define TIOCMGET			0x5415
	%define TIOCMBIS			0x5416
	%define TIOCMBIC			0x5417
	%define TIOCMSET			0x5418
	%define TIOCGSOFTCAR		0x5419
	%define TIOCSSOFTCAR		0x541A
	%define FIONREAD			0x541B
	%define TIOCINQ				FIONREAD
	%define TIOCLINUX			0x541C
	%define TIOCCONS			0x541D
	%define TIOCGSERIAL			0x541E
	%define TIOCSSERIAL			0x541F
	%define TIOCPKT				0x5420
	%define FIONBIO				0x5421
	%define TIOCNOTTY			0x5422
	%define TIOCSETD			0x5423
	%define TIOCGETD			0x5424
	%define TCSBRKP				0x5425	; Needed for POSIX tcsendbreak() 
	%define TIOCSBRK			0x5427  ; BSD compatibility 
	%define TIOCCBRK			0x5428  ; BSD compatibility 
	%define TIOCGSID			0x5429  ; Return the session ID of FD 
	;%define TCGETS2		_IOR('T', 0x2A, struct termios2)
	;%define TCSETS2		_IOW('T', 0x2B, struct termios2)
	;%define TCSETSW2		_IOW('T', 0x2C, struct termios2)
	;%define TCSETSF2		_IOW('T', 0x2D, struct termios2)
	%define TIOCGRS485			0x542E
%ifndef TIOCSRS485
	%define TIOCSRS485			0x542F
%endif
	;%define TIOCGPTN		_IOR('T', 0x30, unsigned int) ; Get Pty Number (of pty-mux device) 
	;%define TIOCSPTLCK		_IOW('T', 0x31, int)  ; Lock/unlock Pty 
	;%define TIOCGDEV		_IOR('T', 0x32, unsigned int) ; Get primary device node of /dev/console 
	%define TCGETX				0x5432  ; SYS5 TCGETX compatibility 
	%define TCSETX				0x5433
	%define TCSETXF				0x5434
	%define TCSETXW				0x5435
	;%define TIOCSIG			_IOW('T', 0x36, int)  ; pty: generate signal 
	%define TIOCVHANGUP			0x5437
	;%define TIOCGPKT		_IOR('T', 0x38, int) ; Get packet mode state 
	;%define TIOCGPTLCK		_IOR('T', 0x39, int) ; Get Pty lock state 
	;%define TIOCGEXCL		_IOR('T', 0x40, int) ; Get exclusive mode state 

	%define FIONCLEX			0x5450
	%define FIOCLEX				0x5451
	%define FIOASYNC			0x5452
	%define TIOCSERCONFIG		0x5453
	%define TIOCSERGWILD		0x5454
	%define TIOCSERSWILD		0x5455
	%define TIOCGLCKTRMIOS		0x5456
	%define TIOCSLCKTRMIOS		0x5457
	%define TIOCSERGSTRUCT		0x5458  ; For debugging only 
	%define TIOCSERGETLSR		0x5459  ; Get line status register 
	%define TIOCSERGETMULTI		0x545A  ; Get multiport config  
	%define TIOCSERSETMULTI 	0x545B  ; Set multiport config 

	%define TIOCMIWAIT			0x545C	; wait for a change on serial input line(s) 
	%define TIOCGICOUNT			0x545D	; read serial port __inline__ interrupt counts 

	; Some arches already define FIOQSIZE due to a historical
	; conflict with a Hayes modem-specific ioctl value.
	%ifndef FIOQSIZE
		%define FIOQSIZE		0x5460
	%endif

	; Used for packet mode
	%define TIOCPKT_DATA		 0
	%define TIOCPKT_FLUSHREAD	 1
	%define TIOCPKT_FLUSHWRITE	 2
	%define TIOCPKT_STOP		 4
	%define TIOCPKT_START		 8
	%define TIOCPKT_NOSTOP		16
	%define TIOCPKT_DOSTOP		32
	%define TIOCPKT_IOCTL		64

	%define TIOCSER_TEMT		0x01	; Transmitter physically empty

	; from bits/ioctls.h
	
	; Routing table calls.
	%define SIOCADDRT			0x890B		; add routing table entry	
	%define SIOCDELRT			0x890C		; delete routing table entry	
	%define SIOCRTMSG			0x890D		; call to routing system	
	
	; Socket configuration controls. 
	%define SIOCGIFNAME			0x8910		; get iface name		
	%define SIOCSIFLINK			0x8911		; set iface channel		
	%define SIOCGIFCONF			0x8912		; get iface list		
	%define SIOCGIFFLAGS		0x8913		; get flags			
	%define SIOCSIFFLAGS		0x8914		; set flags			
	%define SIOCGIFADDR			0x8915		; get PA address		
	%define SIOCSIFADDR			0x8916		; set PA address		
	%define SIOCGIFDSTADDR		0x8917		; get remote PA address	
	%define SIOCSIFDSTADDR		0x8918		; set remote PA address	
	%define SIOCGIFBRDADDR		0x8919		; get broadcast PA address	
	%define SIOCSIFBRDADDR		0x891a		; set broadcast PA address	
	%define SIOCGIFNETMASK		0x891b		; get network PA mask		
	%define SIOCSIFNETMASK		0x891c		; set network PA mask		
	%define SIOCGIFMETRIC		0x891d		; get metric			
	%define SIOCSIFMETRIC		0x891e		; set metric			
	%define SIOCGIFMEM			0x891f		; get memory address (BSD)	
	%define SIOCSIFMEM			0x8920		; set memory address (BSD)	
	%define SIOCGIFMTU			0x8921		; get MTU size			
	%define SIOCSIFMTU			0x8922		; set MTU size			
	%define SIOCSIFNAME			0x8923		; set interface name		
	%define	SIOCSIFHWADDR		0x8924		; set hardware address 	
	%define SIOCGIFENCAP		0x8925		; get/set encapsulations       
	%define SIOCSIFENCAP		0x8926
	%define SIOCGIFHWADDR		0x8927		; Get hardware address		
	%define SIOCGIFSLAVE		0x8929		; Driver slaving support	
	%define SIOCSIFSLAVE		0x8930
	%define SIOCADDMULTI		0x8931		; Multicast address lists	
	%define SIOCDELMULTI		0x8932
	%define SIOCGIFINDEX		0x8933		; name -> if_index mapping	
	%define SIOGIFINDEX			SIOCGIFINDEX	; misprint compatibility :-)	
	%define SIOCSIFPFLAGS		0x8934		; set/get extended flags set	
	%define SIOCGIFPFLAGS		0x8935
	%define SIOCDIFADDR			0x8936		; delete PA address		
	%define	SIOCSIFHWBROADCAST	0x8937		; set hardware broadcast addr	
	%define SIOCGIFCOUNT		0x8938		; get number of devices 
	
	%define SIOCGIFBR			0x8940		; Bridging support		
	%define SIOCSIFBR			0x8941		; Set bridging options 	
	
	%define SIOCGIFTXQLEN		0x8942		; Get the tx queue length	
	%define SIOCSIFTXQLEN		0x8943		; Set the tx queue length 	
	
	
	; ARP cache control calls. 
	;  0x8950 - 0x8952  ; obsolete calls, don't re-use 
	%define SIOCDARP			0x8953		; delete ARP table entry	
	%define SIOCGARP			0x8954		; get ARP table entry		
	%define SIOCSARP			0x8955		; set ARP table entry		
	
	; RARP cache control calls. 
	%define SIOCDRARP			0x8960		; delete RARP table entry	
	%define SIOCGRARP			0x8961		; get RARP table entry		
	%define SIOCSRARP			0x8962		; set RARP table entry		
	
	; Driver configuration calls 
	
	%define SIOCGIFMAP			0x8970		; Get device parameters	
	%define SIOCSIFMAP			0x8971		; Set device parameters	
	
	; DLCI configuration calls 
	
	%define SIOCADDDLCI			0x8980		; Create new DLCI device	
	%define SIOCDELDLCI			0x8981		; Delete DLCI device		
	
	; Device private ioctl calls.  
	
	; These 16 ioctls are available to devices via the do_ioctl() device
	;   vector.  Each device should include this file and redefine these
	;   names as their own. Because these are device dependent it is a good
	;   idea _NOT_ to issue them to random objects and hope.  
	
	%define SIOCDEVPRIVATE 		0x89F0	; to 89FF 
	
	;	These 16 ioctl calls are protocol private
	 
	%define SIOCPROTOPRIVATE	0x89E0 ; to 89EF 
	
	
%endif ; __ASM_GENERIC_IOCTLS_INC